HS&E test practice: fire safety and hot work questions
Last updated: · Certloom Learning
Written by Certloom Learning from the pages listed under Sources, checked on the date shown. Not reviewed or endorsed by CITB or CSCS.
Short answer: A fire needs fuel, oxygen and heat. On site that means clearing waste, controlling hot work with a permit and a fire watch, and avoiding hot work altogether where a cold method works. These nine free questions follow HSE guidance HSG168.
What does the fire triangle mean on site?
Fuel, oxygen and heat. Removing waste, packaging and offcuts removes fuel; keeping sparks and flames away from it controls heat.
Source: HSE: HSG168 Fire safety in construction (checked 2026-11-12)
What are the key hot work controls?
- Avoid hot work where a cold method such as bolting is possible.
- Use a hot work permit from an authorised person where your site requires one.
- Remove or cover combustible materials nearby and check below any gaps.
- Keep a fire watch after the work stops, for the time the permit or site rules set.
Source: HSE: HSG168 Fire safety in construction (checked 2026-11-12)
Why not hot work right up to finishing time?
Hot material can smoulder unseen and ignite later, when nobody is on site to raise the alarm.
Source: HSE: HSG168 Fire safety in construction (checked 2026-11-12)
SiteSide has 1,375 original questions with the English wording on top and full Romanian or Polish underneath, timed 50-question mocks and practice of your mistakes.
Get SiteSide on Google Play Try the free sampleiPhone app coming soon. Until then, practise free on this site.
Free practice questions
9 original practice questions from SiteSide's checked bank of 1,375. Open each one to see the answer and why.
Which three things does a fire need to start and keep burning?
- Fuel, smoke and wind
- Heat, carbon dioxide and fuel
- Oxygen, dust and dry weather
- Fuel, oxygen and heat
Show answer
Answer: D. A fire needs fuel, oxygen and heat to start and keep burning; this is called the fire triangle. Carbon dioxide does not feed a fire, it is used in some extinguishers to smother one. HSE guidance HSG168 uses the fire triangle to explain how fires on site can be prevented.
Source: HSE HSG168 Fire safety in construction · b06-001
Why should packaging, offcuts and other waste be cleared away regularly?
- It means fewer fire extinguishers are needed
- It removes fuel that a fire could use
- It is only to keep the site tidy for visitors
- It helps the fire alarm system work better
Show answer
Answer: B. Waste such as packaging, timber offcuts and plastic wrap is fuel, so clearing it regularly takes away one side of the fire triangle. It is not just about looks: the Construction (Design and Management) Regulations 2015 require steps to prevent the risk of fire. Having fewer extinguishers is never a reason to let waste build up.
Source: HSE HSG168 Fire safety in construction, Construction (Design and Management) Regulations 2015, regulation 29 · b06-002
Which of these jobs is normally treated as hot work?
- Cutting steel with an angle grinder
- Laying bricks on a very hot day
- Drilling holes with a battery drill
- Painting with water-based paint
Show answer
Answer: A. Hot work means any work that uses flames or makes heat or sparks, such as welding, gas cutting and grinding. Hot weather does not make bricklaying hot work. Sparks from an angle grinder can travel a long way and set fire to materials, which is why hot work needs extra controls (HSE guidance HSG168).
Source: HSE HSG168 Fire safety in construction · b06-003
On many sites, what must be in place before hot work starts?
- A dust mask and a pair of safety glasses
- A fire extinguisher nearby, with no other checks needed
- A hot work permit from an authorised person
- Agreement from the worker next to you
Show answer
Answer: C. Many sites use a hot work permit, issued by an authorised person, to control hot work. The permit sets out the checks needed, such as clearing combustibles, having the right extinguisher and keeping a fire watch. An extinguisher on its own is not enough. Follow your site rules and ask your supervisor if you are unsure.
Source: HSE HSG168 Fire safety in construction · b06-004
Why is a fire watch kept going for a time after hot work has finished?
- Hot material can smoulder unseen and start a fire later
- Because the permit says someone must guard the tools overnight
- To check the area is clean for the next trade
- To make sure the welding gear is put away
Show answer
Answer: A. Sparks and hot metal can fall into gaps and smoulder for some time before flames appear. That is why a fire watch continues after hot work stops, for the time set by the permit or site rules. Putting tools away or cleaning up does not check for hidden fires (HSE guidance HSG168).
Source: HSE HSG168 Fire safety in construction · b06-005
Before hot work starts, what should happen to combustible materials close by?
- Leave them where they are, as long as an extinguisher is close
- Move them so they are just behind the person working
- Spray them with water and then carry on
- Remove them, or protect them with fire-resistant covers
Show answer
Answer: D. Combustible materials near hot work should be moved away, or protected with fire-resistant covers or blankets if they cannot be moved. Having an extinguisher nearby helps if a fire starts, but it does not stop one starting. Wetting materials is not a reliable control, and materials just behind the worker are still in reach of sparks (HSE guidance HSG168).
Source: HSE HSG168 Fire safety in construction · b06-006
You are about to start grinding on an upper floor. There is a gap in the floor with timber stored below it. What should you do?
- Ask a colleague to stand below the gap while you are working
- Stop and get the gap sealed and the area below checked
- Start work and keep an eye on the gap
- Cover the gap with a sheet of cardboard and start
Show answer
Answer: B. Sparks from grinding can fall through gaps and set fire to materials below where nobody is watching. Stop, and make sure the gap is sealed and the area below is checked and protected before work starts. Cardboard is combustible, so covering the gap with it adds fuel. Follow the hot work permit and ask your supervisor.
Source: HSE HSG168 Fire safety in construction · b06-007
What is the best first step to reduce the fire risk from hot work?
- Keep two extinguishers nearby instead of one
- Use a cold method instead, such as bolting, where possible
- Do the hot work as quickly as possible to cut the time at risk
- Do the hot work at the very end of the shift
Show answer
Answer: B. HSE guidance HSG168 says the first step is to avoid hot work where possible, for example by using bolted joints or cold cutting methods. Having more extinguishers helps only after a fire starts. Rushing the work, or doing it at the very end of the shift, increases the risk.
Source: HSE HSG168 Fire safety in construction · b06-008
Why should hot work stop well before the end of the working day?
- Welding gas is not allowed on site at night
- A fire could start after everyone has gone home
- The permit always runs out at 5 pm
- The fire alarm is switched off at night
Show answer
Answer: B. Hot material can smoulder unseen and burst into flames later. If hot work finishes at the end of the day, a fire could start when the site is empty and nobody is there to raise the alarm. Permits are not tied to one fixed clock time; they set conditions, such as a fire watch after the work stops (HSE guidance HSG168).
Source: HSE HSG168 Fire safety in construction · b06-009
Related guides
- Practice questions by topic
- On-site decisions practice questions
- Operatives test
- Test format and pass mark
- All guides
Sources
- HSE: HSG168 Fire safety in construction (HSE), checked 2026-11-12
- HSE: Construction (Design and Management) Regulations 2015 (HSE), checked 2026-11-12
General information, not legal advice. CITB and CSCS rules and prices change, so check their pages before you book or apply. SiteSide is independent and not affiliated with CITB, CSCS or HSE.