HS&E test practice: hazardous substances (COSHH) questions
Last updated: · Certloom Learning
Written by Certloom Learning from the pages listed under Sources, checked on the date shown. Not reviewed or endorsed by CITB or CSCS.
Short answer: COSHH 2002 requires employers to assess the health risk from a substance and control it, with avoiding or substituting the substance first and a face mask last. These nine free questions also cover safety data sheets and the hazard pictograms on labels.
What does COSHH require?
- The employer assesses the health risk before work with a hazardous substance starts and decides the controls.
- Prevent exposure first, for example by not using the substance or swapping it for a safer one.
- Respiratory protective equipment comes last: it protects only the wearer and only when it is the right type and fits.
Source: The Control of Substances Hazardous to Health Regulations 2002; HSE: COSHH (checked 2026-11-12)
Where do I find the hazards of a product?
On its safety data sheet, which the supplier must provide. Delivery notes and invoices do not show hazards. If you cannot find the sheet, ask your supervisor.
Source: HSE: COSHH (checked 2026-11-12)
What about asbestos?
Asbestos has its own HSE guidance and regulations. The free questions here focus on COSHH and labels; the full bank in the app goes deeper into dust and asbestos.
Source: HSE: Asbestos (checked 2026-11-12)
SiteSide has 1,375 original questions with the English wording on top and full Romanian or Polish underneath, timed 50-question mocks and practice of your mistakes.
Get SiteSide on Google Play Try the free sampleiPhone app coming soon. Until then, practise free on this site.
Free practice questions
9 original practice questions from SiteSide's checked bank of 1,375. Open each one to see the answer and why.
What are the COSHH Regulations 2002 mainly about?
- Planning safe work on scaffolds
- Reporting accidents and near misses to the HSE
- Controlling substances that can harm health
- Controlling noise from machines and tools
Show answer
Answer: C. The Control of Substances Hazardous to Health Regulations 2002 (COSHH) require employers to prevent or control exposure to substances that can harm health, such as chemicals, dust and fumes. Noise is covered by a different law, the Control of Noise at Work Regulations 2005. Ask your supervisor if you are unsure which rules apply to a task.
Source: The Control of Substances Hazardous to Health Regulations 2002, HSE: COSHH · b03-001
Under COSHH, what must an employer do before work with a hazardous substance starts?
- Assess the health risks and decide on controls
- Send details of the product to the local council
- Buy the cheapest version of the product
- Ask workers to sign that they accept the risk
Show answer
Answer: A. Regulation 6 of COSHH says the employer must make a suitable and sufficient assessment of the risks to health and decide what controls are needed. Asking workers to accept the risk does not remove the employer's duty to control it. Your supervisor should explain the assessment to you before you start.
Source: COSHH 2002, regulation 6: Assessment of health risks, HSE: COSHH risk assessment · b03-002
When planning to control a hazardous substance, what should be considered first?
- Avoid it or use a safer substance
- Give everyone on site a disposable dust mask
- Put up a warning sign
- Limit the job to one hour
Show answer
Answer: A. Under regulation 7 of COSHH, the first choice is to prevent exposure, for example by not using the substance or swapping it for a safer one. Masks and other PPE come last, because they only protect the wearer and only when worn correctly. Signs warn people but do not reduce the hazard.
Source: COSHH 2002, regulation 7: Prevention or control of exposure · b03-003
Why is a face mask (RPE) the last choice for controlling dust or fumes?
- The law says masks may only be used in emergencies
- It only protects the wearer, and only when it fits
- It protects people nearby more than the wearer
- It costs too much for most building firms to buy
Show answer
Answer: B. COSHH and HSE guidance put respiratory protective equipment (RPE) last because it protects only the person wearing it, and only if it is the right type, fits well and is worn the whole time. Controls such as water suppression or extraction reduce the dust for everyone. RPE is still allowed and often needed alongside other controls, so it is not limited to emergencies.
Source: COSHH 2002, regulation 7: Prevention or control of exposure, HSE: Respiratory protective equipment · b03-004
Where would you find detailed facts about a product's hazards, safe handling and first aid?
- On the delivery note
- In the site visitor book
- On the supplier's invoice
- On its safety data sheet
Show answer
Answer: D. A safety data sheet gives detailed information about a chemical product, including its hazards, safe handling, storage, spill clean-up, first aid and disposal. Delivery notes and invoices only show what was sent and the price. HSE says data sheets help employers complete their COSHH assessment.
Source: HSE: Safety data sheets · b03-005
Who must provide a safety data sheet for a hazardous chemical product?
- The worker who uses it
- The supplier of the product
- The site security team
- The local fire and rescue service
Show answer
Answer: B. Suppliers of hazardous chemicals must give their customers a safety data sheet. Workers do not write data sheets, but they should be told the important information from them. If you cannot find the data sheet for a product, ask your supervisor before using it.
Source: HSE: Safety data sheets · b03-006
What do the current GB hazard pictograms on chemical labels look like?
- A black symbol in a red-edged diamond
- A white symbol on a green square
- A white symbol on a round blue background
- A black symbol on an orange square
Show answer
Answer: A. Under the GB CLP Regulation, hazard pictograms are a black symbol on a white background inside a diamond with a red border. The old orange square symbols have been replaced, so do not rely on them to understand a label. Blue circles are mandatory signs and green squares are safe condition signs, not chemical hazard labels.
Source: HSE: Hazard pictograms · b03-007
A label shows a flame above a circle. What does this pictogram mean?
- Only flammable when it gets very hot
- Hazardous to fish, plants and rivers
- Gas stored in a pressurised cylinder
- Oxidiser: it can make fires worse
Show answer
Answer: D. The flame over a circle pictogram means the substance is an oxidiser. It can cause a fire or make a fire burn more fiercely, so keep it away from flammable materials. It is easy to confuse with the plain flame pictogram, which means the product itself is flammable.
Source: HSE: Hazard pictograms · b03-008
What does the corrosion pictogram (liquid dripping onto a hand and a metal bar) warn you about?
- It can explode if dropped or heated
- It gives off a gas that smells bad
- It is only harmful if you swallow some of it
- It can burn skin and eyes and damage metal
Show answer
Answer: D. The corrosion pictogram shows that a substance can cause severe skin burns and eye damage, and may attack metals. Some strong cleaners and acids carry this symbol. Wear the gloves and eye protection given in the safety data sheet and follow your site rules.
Source: HSE: Hazard pictograms · b03-009
Related guides
- Practice questions by topic
- Operatives test
- Test format and pass mark
- Revision options compared
- All guides
Sources
- The Control of Substances Hazardous to Health Regulations 2002 (legislation.gov.uk), checked 2026-11-12
- HSE: COSHH (HSE), checked 2026-11-12
- HSE: Asbestos (HSE), checked 2026-11-12
General information, not legal advice. CITB and CSCS rules and prices change, so check their pages before you book or apply. SiteSide is independent and not affiliated with CITB, CSCS or HSE.