HS&E test practice: lifting operations questions
Last updated: · Certloom Learning
Written by Certloom Learning from the pages listed under Sources, checked on the date shown. Not reviewed or endorsed by CITB or CSCS.
Short answer: LOLER 1998 says every lift must be planned by a competent person, supervised and carried out safely. Unless a written examination scheme says otherwise, lifting accessories and equipment that lifts people need a thorough examination at least every 6 months, and other lifting equipment at least every 12 months. Every accessory must show its safe working load.
How often must lifting equipment be thoroughly examined?
| Equipment | Interval (unless an examination scheme says otherwise) |
|---|---|
| Lifting accessories: slings, shackles, chains, eyebolts | At least every 6 months |
| Equipment that lifts people, such as a MEWP or passenger hoist | At least every 6 months |
| Other lifting equipment, such as a goods-only hoist or crane | At least every 12 months |
A thorough examination is also needed after installation and after exceptional circumstances, such as damage, that could affect safety.
Source: LOLER 1998, regulation 9 (thorough examination); HSE: LOLER, a simple guide (INDG290) (checked 2026-11-15)
Worked example: is the sling in date?
A chain sling was last thoroughly examined on 10 May. With no examination scheme, the latest date for the next examination is 10 November, six months later. On 15 November it is overdue and must not be used. A goods hoist examined on 10 May has until 10 May the following year. In the test, a missing safe working load label is treated the same way as an out-of-date examination: take it out of use and tell your supervisor.
Source: LOLER 1998, regulation 9 (thorough examination) (checked 2026-11-15)
What does the safe working load mean?
It is the most the equipment may lift in normal use. It is not the breaking load, and you never go over it, even slightly. If the label is missing, nobody can know the limit.
Source: LOLER 1998, regulation 9 (thorough examination) (checked 2026-11-15)
Who does what in a lift?
- A competent person plans the lift: load, equipment, ground, people and weather.
- The operator does daily checks; that is not a thorough examination.
- A competent examiner does the thorough examination and reports dangerous defects straight away; the equipment is not used until it is put right.
- Everyone else stays out from under suspended loads.
Source: HSE: LOLER, a simple guide (INDG290) (checked 2026-11-15)
SiteSide has 1,375 original questions with the English wording on top and full Romanian or Polish underneath, timed 50-question mocks and practice of your mistakes.
Get SiteSide on Google Play Try the free sampleiPhone app coming soon. Until then, practise free on this site.
Free practice questions
9 original practice questions from SiteSide's checked bank of 1,375. Open each one to see the answer and why.
Under the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), who must plan a lifting operation?
- A competent person
- The delivery driver
- Any worker with an induction
- The slinger on the day
Show answer
Answer: A. LOLER says every lifting operation must be properly planned by a competent person, supervised and carried out safely. A competent person has the knowledge and experience to judge the load, the equipment and the site. Being the slinger on the day does not by itself make someone the person who plans the lift.
Source: LOLER 1998, regulation 8: Organisation of lifting operations · b09-001
Unless an examination scheme says otherwise, how often must a lifting accessory such as a chain sling be thoroughly examined?
- Only when it is new
- At least every 12 months
- At least every 2 years
- At least every 6 months
Show answer
Answer: D. LOLER requires lifting accessories, such as slings, shackles and chains, to be thoroughly examined by a competent person at least every 6 months, unless a written examination scheme sets other intervals. Twelve months is the period for lifting equipment that does not lift people, not for accessories. Accessories take a lot of wear, so they are examined more often.
Source: LOLER 1998, regulation 9: Thorough examination and inspection, HSE: Lifting Operations and Lifting Equipment Regulations (LOLER) · b09-002
Unless an examination scheme says otherwise, how often must equipment used to lift people, such as a MEWP, be thoroughly examined?
- At least every 6 months
- At least every 12 months
- At least every 3 years
- Only after it breaks down
Show answer
Answer: A. Under LOLER, lifting equipment used for lifting people must be thoroughly examined at least every 6 months, unless an examination scheme sets other intervals. The 12 month period only applies to lifting equipment that does not lift people. Waiting for a breakdown would let hidden faults put people at risk.
Source: LOLER 1998, regulation 9: Thorough examination and inspection · b09-003
Unless an examination scheme says otherwise, how often must a goods-only hoist be thoroughly examined?
- At least every 7 days
- At least every 12 months
- At least every 5 years
- Only when it is first put up
Show answer
Answer: B. LOLER says lifting equipment that does not lift people, and is not an accessory, must be thoroughly examined at least every 12 months unless an examination scheme says otherwise. An examination is also needed after installation, but that alone is not enough. Shorter site checks may also happen, but they are not the legal thorough examination interval.
Source: LOLER 1998, regulation 9: Thorough examination and inspection, HSE: LOLER - a simple guide (INDG290) · b09-004
Apart from regular intervals, when else must lifting equipment be thoroughly examined under LOLER?
- Only when its paint is damaged
- Each time a new operator starts to use it
- After events that could affect its safety
- Only at the end of each building project
Show answer
Answer: C. LOLER requires a thorough examination each time exceptional circumstances happen that could affect the equipment's safety, such as damage or failure. A new operator does not need a new examination, but they must be trained and authorised. If you think lifting equipment has been damaged, stop using it and tell your supervisor.
Source: LOLER 1998, regulation 9: Thorough examination and inspection · b09-005
Who should carry out the thorough examination of lifting equipment?
- Any slinger who uses the equipment
- The operator during the daily check
- A competent person
- The driver who delivers the equipment
Show answer
Answer: C. LOLER requires thorough examinations to be done by a competent person who has the practical and theoretical knowledge to find defects and judge how serious they are. The operator's daily check is important, but it is not a thorough examination. The results must be recorded in a written report.
Source: HSE: LOLER - a simple guide (INDG290), LOLER 1998, regulation 9: Thorough examination and inspection · b09-006
A thorough examination finds a defect that could cause serious injury. What must happen to the equipment?
- It can be used at half its safe working load
- It must not be used until it is repaired
- It can be used until the job is finished
- It can be used if the operator takes care
Show answer
Answer: B. Under LOLER, the competent person must tell the employer straight away about a dangerous defect, and the equipment must not be used until it is put right. The examiner must also send a report to the enforcing authority. Lowering the load does not make a dangerous defect safe.
Source: LOLER 1998, regulation 10: Reports and defects · b09-007
What does the safe working load (SWL) marked on a sling tell you?
- The load at which it will break
- The weight of the sling itself
- The most it may lift in normal use
- The least load that keeps it tight
Show answer
Answer: C. The safe working load is the maximum load the sling may lift in normal use. LOLER says lifting equipment and accessories must be clearly marked so people know their safe limit. It is not the breaking load, and you must never go over the SWL, even by a small amount.
Source: LOLER 1998, regulation 7: Marking of lifting equipment · b09-008
You are given a fabric sling for a lift, but it has no label showing its safe working load. What should you do?
- Judge its strength from its thickness
- Do not use it and tell your supervisor
- Use it only for light loads
- Use two of them together to be extra safe
Show answer
Answer: B. LOLER requires lifting accessories to be marked with their safe working load. Without the label, nobody can know what the sling can safely lift, so it should be taken out of use and reported. Using it only for light loads is a common shortcut, but you still cannot know what is safe.
Source: LOLER 1998, regulation 7: Marking of lifting equipment · b09-009
Related guides
- Practice questions by topic
- Excavation practice questions
- Tools practice questions
- Study plan
- All guides
Sources
- LOLER 1998, regulation 9 (thorough examination) (legislation.gov.uk), checked 2026-11-15
- HSE: LOLER, a simple guide (INDG290) (HSE), checked 2026-11-15
General information, not legal advice. CITB and CSCS rules and prices change, so check their pages before you book or apply. SiteSide is independent and not affiliated with CITB, CSCS or HSE.