SiteSide

Specialist HS&E tests explained

Last updated: · Certloom Learning
Written by Certloom Learning from the pages listed under Sources, checked on the date shown. Not reviewed or endorsed by CITB or CSCS.

Short answer: The specialist HS&E tests take the five core knowledge areas of the operatives test and add questions for one chosen specialist area, such as supervisory, demolition, plumbing, highway works or specialist work at height. CITB lists 12 of them. Each has 50 questions in 45 minutes and a 90% pass mark (45 of 50).

Which specialist tests does CITB offer?

SUPSupervisory
DEMDemolition
PLUMPlumbing (JIB)
HIWHighway works
WAHSpecialist work at height
LAEELifts and escalators
TUNNTunnelling
HAPSHVACR: heating and plumbing services
PFWHVACR: pipefitting and welding
DUCTHVACR: ductwork
RAACHVACR: refrigeration and air conditioning
SAFHVACE: services and facilities maintenance

Source: CITB: Specialist test (checked 2026-11-12)

Who needs a specialist test instead of the operatives test?

CSCS points the Supervisor card, and Skilled Worker and Advanced Craft cards in certain occupations, to a specialist test. Which specialist area you take depends on your card and trade, so check the CSCS Card Finder before booking, because the wrong level or area will not count for your card (which test level).

Source: CSCS: CITB Health, safety and environment test (which level for which card) (checked 2026-11-12)

What is in a specialist test?

CITB says the tests include questions from the five core knowledge areas in the operatives test as well as relevant questions in the chosen specialist area. The pass mark and structure are the same as the other levels: 50 questions, 45 minutes, at least 45 correct.

Source: CITB: Specialist test (checked 2026-11-12)

Is there language support for specialist tests?

The specialist test has voiceovers in English and Welsh. For other languages CITB lists a translator arranged by its adjustments team (test in your language).

Source: CITB: Support for the HS&E test (voiceovers, translators) (checked 2026-11-12)

How do I revise for a specialist test?

CITB lists the GT100 book (sections A to E plus the relevant chapter in section F), a DVD, a digital version and the HS&E app. For specialist training, CITB points you to your trade association or industry body. SiteSide covers only the shared operatives ground, not the specialist chapters (revision options).

Source: CITB: Prepare for the test (checked 2026-11-12)

SiteSide has 1,375 original questions with the English wording on top and full Romanian or Polish underneath, timed 50-question mocks and practice of your mistakes.

Get SiteSide on Google Play Try the free sample

iPhone app coming soon. Until then, practise free on this site.

Free mini quiz

5 original practice questions from SiteSide's checked bank of 1,375. Open each one to see the answer and why.

  1. Apart from regular intervals, when else must lifting equipment be thoroughly examined under LOLER?

    1. Only when its paint is damaged
    2. Each time a new operator starts to use it
    3. After events that could affect its safety
    4. Only at the end of each building project
    Show answer

    Answer: C. LOLER requires a thorough examination each time exceptional circumstances happen that could affect the equipment's safety, such as damage or failure. A new operator does not need a new examination, but they must be trained and authorised. If you think lifting equipment has been damaged, stop using it and tell your supervisor.

    Source: LOLER 1998, regulation 9: Thorough examination and inspection · b09-005

  2. Besides the start of each shift, when else must an excavation be inspected by a competent person?

    1. Whenever a new worker joins the gang
    2. Each time the access ladder is moved along the trench
    3. Only when the client visits the site
    4. After anything that may affect its stability
    Show answer

    Answer: D. Under regulation 22 of the CDM Regulations 2015, an inspection is also needed after any event likely to affect the strength or stability of the excavation, such as flooding or a vehicle hitting the supports. A new worker joining does not change the ground, so it does not by itself need an inspection. Ask your supervisor if you are not sure an inspection has been done.

    Source: Construction (Design and Management) Regulations 2015, regulation 22 · b08-005

  3. Why must guards be kept in place on power tools?

    1. To keep the motor cool and free of dirt
    2. To make the tool last longer between services
    3. To stop contact with dangerous moving parts
    4. To reduce the noise the tool makes in use
    Show answer

    Answer: C. PUWER requires measures, such as guards, to prevent contact with dangerous parts of machinery. A guard is there to protect you from blades, discs and other moving parts, not to protect the tool. Never remove or adjust a guard unless you are trained and the instructions allow it.

    Source: PUWER 1998, regulation 11: Dangerous parts of machinery · b10-005

  4. Why is a face mask (RPE) the last choice for controlling dust or fumes?

    1. The law says masks may only be used in emergencies
    2. It only protects the wearer, and only when it fits
    3. It protects people nearby more than the wearer
    4. It costs too much for most building firms to buy
    Show answer

    Answer: B. COSHH and HSE guidance put respiratory protective equipment (RPE) last because it protects only the person wearing it, and only if it is the right type, fits well and is worn the whole time. Controls such as water suppression or extraction reduce the dust for everyone. RPE is still allowed and often needed alongside other controls, so it is not limited to emergencies.

    Source: COSHH 2002, regulation 7: Prevention or control of exposure, HSE: Respiratory protective equipment · b03-004

  5. What must happen when daily noise exposure reaches the upper exposure action value?

    1. Hearing protection is only given on request
    2. Workers can decide whether to wear protection
    3. Only the tool operator needs protection
    4. Hearing protection must be provided and worn
    Show answer

    Answer: D. At 85 dB(A) the Control of Noise at Work Regulations 2005 require the employer to provide hearing protection and make sure it is used. Making it available on request is the rule at the lower action value, not the upper one. Anyone exposed at that level needs protection, not just the person using the tool.

    Source: Control of Noise at Work Regulations 2005, regulation 7 · b04-005

Related guides

Sources

General information, not legal advice. CITB and CSCS rules and prices change, so check their pages before you book or apply. SiteSide is independent and not affiliated with CITB, CSCS or HSE.