SiteSide

The Level 1 health and safety award for the Labourer card

Last updated: · Certloom Learning
Written by Certloom Learning from the pages listed under Sources, checked on the date shown. Not reviewed or endorsed by CITB or CSCS.

Short answer: To get the green CSCS Labourer card you need two things: a pass in the CITB health, safety and environment test, and the Level 1 Award in Health and Safety in a Construction Environment (Level 4 in Scotland) or an alternative CSCS accepts. CSCS lists many awarding bodies for the Level 1 Award and a set of short courses it accepts instead, most for five years.

Who needs the Level 1 Award?

People applying for the Labourer card who will be labouring on site. CSCS says that if you are enrolled on, or already hold, a relevant qualification for a skilled occupation, you do not need a separate Level 1 course, and you should apply for the card that matches that qualification instead. Cleaners doing general cleaning on live construction sites also apply for the Labourer card.

Source: CSCS: Labourer card (checked 2026-11-15)

What does CSCS accept?

CSCS does not run the training. It lists awarding bodies that offer the Level 1 Award, including City & Guilds, Highfield, NOCN, Pearson, ProQual and others.

Source: CSCS: Labourer card (checked 2026-11-15)

Which short courses count instead?

CourseRun byHow long it counts
Health and Safety Awareness CourseCITBFive years
Safe2SiteCOSACFive years
1 Day Health and Safety Awareness CourseDrilling and Sawing AssociationFive years
Safety, Health and Environment for Construction WorkersIOSHThree years (e-learning not accepted)
Health and Safety Awareness in ConstructionNOCNFive years
Site Safety Awareness CourseNPORSFive years
Core Construction CourseSafety Pass AllianceFive years

CSCS adds that alternatives with an expiry can be used only once, and for five-year alternatives the course must have been completed within four years of your application. Some older courses are listed as closed and accepted for renewals only.

Source: CSCS: Labourer card (checked 2026-11-15)

Worked example: does my course still count?

You did a five-year Safety Pass Alliance course on 1 March 2023 and apply on 15 November 2026. That is within four years, so it counts. If you applied on 2 March 2027 instead, it would be more than four years and you would need a new course. Your HS&E test pass has its own rule: it must be from the last two years when you apply.

Source: CSCS: Labourer card (checked 2026-11-15)

How long does the Labourer card last?

Since 1 February 2025 the first Labourer card lasts two years. If you are still labouring, you can renew for five years with a declaration from your employer or main contractor. For renewing the first two-year card, CSCS accepts an HS&E test pass from the last three years. Details are in the Labourer card guide.

Source: CSCS: Labourer card (checked 2026-11-15)

SiteSide has 1,375 original questions with the English wording on top and full Romanian or Polish underneath, timed 50-question mocks and practice of your mistakes.

Get SiteSide on Google Play Try the free sample

iPhone app coming soon. Until then, practise free on this site.

Free mini quiz

5 original practice questions from SiteSide's checked bank of 1,375. Open each one to see the answer and why.

  1. When can men and women use the same toilets on site?

    1. Never, even on very small sites
    2. Whenever the site has few workers
    3. When each toilet is a single lockable room
    4. When there is a unisex sign fixed on the door
    Show answer

    Answer: C. The Construction (Design and Management) Regulations 2015, Schedule 2, require separate toilets for men and women, except where each toilet is in its own room with a door that can be locked from the inside. A unisex sign on its own does not meet the rule. The size of the site does not change this.

    Source: The Construction (Design and Management) Regulations 2015, Schedule 2 · b02-012

  2. Under the Manual Handling Operations Regulations 1992, what must you as an employee do?

    1. Write your own risk assessments
    2. Lift any load your supervisor tells you to
    3. Use the safe system of work provided
    4. Provide your own lifting equipment
    Show answer

    Answer: C. Regulation 5 says employees must make full and proper use of any system of work their employer provides to reduce manual handling risk. That includes using the aids and methods you have been shown. Assessments are the employer's job, and if you think a task is unsafe you should tell your supervisor rather than just lifting it.

    Source: Manual Handling Operations Regulations 1992, regulation 5 · b05-010

  3. What does the skull and crossbones pictogram mean?

    1. It must always be kept in a fridge
    2. It can kill or seriously harm in small amounts
    3. It is only dangerous when it is heated up or burnt
    4. It is out of date and must be thrown away
    Show answer

    Answer: B. The skull and crossbones shows acute toxicity. The substance can cause death or serious harm even in small amounts if swallowed, breathed in or absorbed through the skin. It does not mean the product is out of date. Only use it if you have been trained and the controls in the COSHH assessment are in place.

    Source: HSE: Hazard pictograms · b03-011

  4. What is the safest way to undo a tight nut with a spanner?

    1. Use the correct size spanner and pull steadily
    2. Slip a length of scaffold tube over it for leverage
    3. Use a slightly larger spanner so it fits easily
    4. Hit the spanner with a hammer to shock it loose
    Show answer

    Answer: A. The correct size spanner grips the nut properly, and pulling steadily keeps you in control if it suddenly gives. A tube over the spanner adds force the tool was not made for, so it can slip or break and cause injury. PUWER says equipment must only be used in the way it is suitable for.

    Source: PUWER 1998, regulation 4: Suitability of work equipment · b10-010

  5. How should full and empty LPG cylinders be stored on site?

    1. Inside the building under construction, out of the rain
    2. Lying down inside the site cabin
    3. Upright, in a secure and ventilated outdoor compound
    4. In the drying room, so they stay warm
    Show answer

    Answer: C. LPG cylinders, including ones that seem empty, should be kept upright with valves closed in a secure, well-ventilated outdoor store. They should not be kept in site cabins, drying rooms or inside the building, where leaking gas could build up. Follow your site's rules on where the gas store is (HSE guidance HSG168).

    Source: HSE HSG168 Fire safety in construction · b06-011

Related guides

Sources

General information, not legal advice. CITB and CSCS rules and prices change, so check their pages before you book or apply. SiteSide is independent and not affiliated with CITB, CSCS or HSE.